Grace MINI-BULLETS II GDI-AQBLT300 Manual De Usuario

red POWER LED will illuminate together. If the blue SIGNAL LED does not 

 

V power adaptor to the DC input jack on the bottom of   

each speaker, then plug into the power wall outlet. You may also insert 6 x ‘AA’ 

 

illuminate, ensure the audio source is turned on and properly connected to the 
jack. 
 

1. 

Connect the 12

size ALKALINE batteries into the battery compartment. Ensure the batteries
polarity (+/-) are correct, at the bottom of the speakers   
(batteries not included in the package). 

 

 

 

 

2.  Press the POWER button and turn the speakers ON.    The POWER LED 

ill light up in blue.  Switch off the speakers by pressing the POWER 

w
button on the speaker, and the LED will turn off. 

 

.  Turn on the audio source to which the transmitter is connected with. 

, and the 

POWER LED on transmitter will light up          .

 

 

1

2.  Turn on the transmitter by set the POWER switch to ON position

 

smitter for best perform

 

location selected. 

 
3.  Select between the channels on the tran

ance for the

 

4.  Press the “POWER” button on the speaker to turn on the speaker Press the 

“SCAN” AUTO-TUNE button to get the best tuning reception on the speaker.   

  

P.4