Brinsea Octagon 20 Advance EX Manual De Usuario
AD21 GB Issue 01
4
3 Unpacking
Your incubator has been supplied in protective packaging. Please remove all tape, strapping and packing from
the incubator and parts. Retain the carton and packing materials to enable the unit to be repacked.
the incubator and parts. Retain the carton and packing materials to enable the unit to be repacked.
Your incubator will include as standard:
Quantity
Quantity
Item
1
Incubator (including removable lid)
1
Egg tray
1
Cable cover and screw
1
Mains cable
1
Set of six egg dividers
1
Guarantee Card
Optional Autoturn Cradle:-
2
Base bars
1
Motorised cradle end
1
Plain cradle end
1
Set of four bolts
3.1
Please identify each part and check that they are all present and undamaged. If there are any parts
damaged or missing please contact your retailer or Brinsea Products (at the address at the end of the
document).
damaged or missing please contact your retailer or Brinsea Products (at the address at the end of the
document).
3.2
Note that if your incubator has been ordered with additional options (such as the Advance Humidity
Pump) separate instructions and component lists apply.
Pump) separate instructions and component lists apply.
3.3
Check also that the electrical supply matches the machine’s requirements (marked on the technical label
on the inside of the lid of the incubator and on the inside of the blank Autoturn cradle end).
on the inside of the lid of the incubator and on the inside of the blank Autoturn cradle end).
3.4
Complete and return your guarantee card to register for the free two year guarantee covering your
incubator.
incubator.
3.5
Go to www.Brinsea.co.uk and register as a free member of the Brinsea User Group (BUG) to receive the
latest news and information such as advance notice about new products, special offers, exclusive
competitions and much more.
latest news and information such as advance notice about new products, special offers, exclusive
competitions and much more.
4 Location and Installation
4.1
Your incubator will give best results in a room free from wide temperature variations and with generous
ventilation – particularly if several incubators are running at the same time. Ensure that the room
temperature cannot drop on a cold night. Ideally thermostatically control the room at between 20 and
25°C (68 and 77°F). Never allow the room temperature to drop below 15°C (59°F) and ensure that the
incubator cannot be exposed to direct sunlight.
ventilation – particularly if several incubators are running at the same time. Ensure that the room
temperature cannot drop on a cold night. Ideally thermostatically control the room at between 20 and
25°C (68 and 77°F). Never allow the room temperature to drop below 15°C (59°F) and ensure that the
incubator cannot be exposed to direct sunlight.
4.2
Connect the mains cable to the incubator lid. Ensure the connector is pushed fully home in its socket.
4.3
Fit the Cable Cover and tighten the screw. DO NOT OPERATE THE INCUBATOR WITHOUT THE
CABLE COVER IN PLACE. ENSURE THE CABLE IS NOT CRUSHED OR PINCHED WHEN THE
COVER IS FITTED. The cover is designed to prevent splashes of water reaching the electrical socket and
it clamps the cable to prevent the connector coming loose.
CABLE COVER IN PLACE. ENSURE THE CABLE IS NOT CRUSHED OR PINCHED WHEN THE
COVER IS FITTED. The cover is designed to prevent splashes of water reaching the electrical socket and
it clamps the cable to prevent the connector coming loose.