Bose Solo TV Sound System Manual De Usuario

TV base is too 

large to place on 

the system

•  Place the sound system in another location such as on an open shelf 

under the TV. 

•  If possible mount your TV on the wall above the sound system.

System will not 

turn on

•  Make sure the power cord is securely connected on both ends.
•  Make sure the power cord is plugged into a live AC (mains) outlet. 

If the outlet is controlled by a switch, make sure the switch is in the 

ON position or test the outlet using a lamp.

•  Reset the system: Unplug the power cord for at least one  

minute. Plug the power in again and listen for the system to emit two 

tones confirming it has power.

No sound

•  Make sure the sound system is turned on and the power  

indicator is on (solid green). 

•  Make sure the sound system is not muted. 
•  Increase the volume. 
•  Make sure the audio cable connection is correct and secure on the 

sound system and the TV. 

•  Make sure the TV is on and set to the correct input. 
•  If you are using a digital audio connection, make sure that the digital 

audio output is not disabled in your TV. See your TV owner’s guide 

for information.

•  If a digital audio connection is not possible, use an analog stereo 

audio connection. 

•  If the sound system is connected to a TV output labelled  

VARIABLE (VAR), make sure the TV internal speakers are turned off, 

the TV volume is turned up, and the TV is not muted.

•  Turn off all devices connected to the Solo system except the one 

you want to hear.

Remote control 

is inconsistent or 

does not work

•  Check the battery to be sure it is installed properly or if it needs to 

be replaced. See “Replacing the remote battery” on page 22. 

•  Point the remote control at the sound system when you press a 

button. 

•  Check that the system status indicator on the sound system flashes 

when you press the remote volume or mute button.

Audio sounds too 

heavy, too much 

bass

•  Change the bass setting to decrease the amount of bass. See 

 “Decreasing the bass” on page 20.

•  Change the position or orientation of the system. In some situations 

the system may produce more bass. See Placement Guidelines on 

page 7.

Sound is 

 distorted

•  Make sure cable connections are secure on the Solo system and TV. 
•  If the sound system is connected to a TV output labelled  

VARIABLE (VAR), reduce the TV volume.

•  Bypass the TV and connect directly to the source using one of the 

Alternate setup methods (page 16).

Sound is coming 

from the TV

•  Turn off your TV’s internal speakers. 
•  Adjust the TV volume.

System status 

indicator is red

•  System error. Call Bose Customer Service.