Whirlpool WTW8800YC Guía De Instalación Rápida

Before you start: remove shipping materials.

It is necessary to remove all shipping materials for proper 

operation and to avoid excessive noise from washer.
NOTE: To avoid floor damage during installation, set the washer 

onto cardboard before moving across the floor.
IMPORTANT: 

 

■

Be sure the foam shipping base has been removed from the 

bottom of the washer as directed in the “Remove Shipping 

Base and Packing Ring” section.

 

■

If foam shipping base has not been removed, be sure lid is 

secured with tape before laying washer on its back.

 

■

Removing the foam shipping base is necessary for proper 

operation.

Place cardboard supports from shipping carton on floor  

behind washer for support. Secure the lid with tape. Using  

two or more people, tip the washer onto its back and place  

on cardboard supports. Remove foam shipping base. Then,  

set washer back upright, and remove the tape from the lid  

so that you can open the lid and remove the foam packing  

ring from the washer tub.
NOTE: Keep foam packing ring in case you need to move  

the washer in the future.

Gently pull hose out of back of washer cabinet from top until 

end emerges.

IMPORTANT: 

Do not force excess drain hose back into rear 

of washer.

 Proper connection of the drain hose helps  

to avoid water leakage and damage to your floors. The drain 

hose is connected to your washer and is stored inside the 

washer cabinet.