Burris Server LH 6000 Manual De Usuario

The control panel must be repositioned to be easily readable in the rack-mount 
position. Reposition the control panel and its bezel, as follows: 

 

1.  Unscrew the two screws securing the control panel to the chassis. 

 

2.  Unhook the control panel from the face of the chassis, as shown in 

Figure 3-2. A ribbon cable still connects it to the NetServer. 

 

 

3.  Remove the lock pawl by squeezing the base until the tabs disengage from 

the mounting slots, as shown in Figure 3-2. The lock pawl is not used on 
the rack-optimized configuration of the NetServer.