Chaparral FS2620R Manual De Usuario
Rebooting the Router
3-23
Restoring the Default Settings
You can restore all of the router’s default settings. You may want to do this if the router is
not working properly and you cannot determine why. This lets you then change the
settings that are critical to your configuration, specifically the topology.
not working properly and you cannot determine why. This lets you then change the
settings that are critical to your configuration, specifically the topology.
For a table of the default settings, see
To restore the default settings:
1
From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu screen displays.
2
Select Restore Defaults and press Enter.
The Restore Defaults screen displays. The selected option is marked with an * next to
it.
it.
3
Select Yes and press Enter to make the change.
The system confirms that the changes are made.
4
Press Enter to return to the Configuration Menu.
Rebooting the Router
You must reboot the router after you change the topology, FC Link Speed, Loop ID, or
router LUN. You should also reboot the router when you connect new devices.
router LUN. You should also reboot the router when you connect new devices.
To reboot the router:
1
From the System Menu, select Shutdown/Restart and press Enter.
The system confirms that you want to shut down.
2
Select Yes and press Enter.
The system confirms that it has shut down.
3
Press Enter to reboot.
The system performs its self-test. When you see the Router Administrator initial
screen, the router is ready. See
screen, the router is ready. See
.
4
If you are connected via Telnet, disconnect and reconnect the Telnet session.