Z Microsystems 8X Manual De Usuario
Doc# 27-0030UM Rev 1.0 Issued 12/04
8
REQUIRED TOOLS
• Phillips Head Screwdriver
• 3/8” ratchet
NOTE: For the fastest and easiest
installation of the 8X, follow
these steps in the sequence they
are presented.
these steps in the sequence they
are presented.
PREPARATIONS
In preparation to install the 8X, take the
following precautionary steps:
Turn off the electrical power to the host
computer.
following precautionary steps:
Turn off the electrical power to the host
computer.
INSTALLATION
PRECAUTIONS
When mounting the 8X, there is a
maximum of .18” screw penetration on the
underside and side screw hole locations.
maximum of .18” screw penetration on the
underside and side screw hole locations.
INSTALLATION