Sterling Home Theater Server XXX10-80 Manual De Usuario

10-Pump, 80-Station Controller 

Chapter 3:  Installation 

25 

 

 

Connecting Vacuum Receivers to the Network 
Make sure that all previous installation steps have been done first before starting this task. 

To connect a vacuum receiver to the network: 

1.  Attach patch cord from vacuum hopper junction box (station demand) to appropriate 

input connector.  See Figures 10 and 11 (connection is shown on first hopper on the block 
only for clarity.) 

2.  Dress the excess patch cord cable with cable ties so it does not interfere with operation 

and gives a pleasing appearance.