Sonos Digital Music System Manual De Usuario

if desired.

A Sonos ZoneBridge will not display in your Zones menu after it is set up. If you wish 
to change the settings for this device, you can choose one of the following options:

• Using  the  Desktop Controller software, select Zones>ZoneBridge Settings. 

Highlight the ZoneBridge, and then click Settings.

• Using  the  Sonos Controller, select System Settings>ZoneBridge Settings from 

the Music menu.

If your house has structured (built-in) wiring, you can make a ‘wired’ connection to the 
new Sonos component. Otherwise, you can connect wirelessly. 

Place the ZonePlayer in the room you have selected.

If you are making a wired connection, connect a standard Ethernet cable from 
either your router, another ZonePlayer, or a ‘live’ network wall plate to any of the 
Ethernet switch connections on the back of the new ZonePlayer. If you are making 
a wireless connection skip this step and proceed to step 3.

Choose one of the following options:

• If you are adding an amplified ZonePlayer, attach desired speakers (see "If you 

• If you are adding a ZonePlayer 80, connect an external amplifier (see "If you are 

connecting a ZonePlayer 80" on page 2-6). 

 Choose one of the following options:

• Using  the  Desktop Controller software, select Add a ZonePlayer or 

 

ZoneBridge from the Zones menu. 

Caution: Do not place any items on top of your ZonePlayer. This may impede the 
air flow and cause your ZonePlayer to overheat.