Siemens AT Command Set Cellular Engines Wireless Modules MC35 Manual De Usuario
AT Command Set
MC35_ATC_01_V04.00
Page 9 of 238
02.04.2002
AT^MONI
Channel numbers are now issued in the form of 4-digit
numbers. Therefore, the examples on page 176 have
been updated.
Frequency hopping will now be indicated with “h” (in-
stead of the previously used “0”.
Notes modified: If during a connection the radio cell is
changed, the parameters LAC, Cell, NCC BCC, PWR
and RXLev of the ‘Serving Cell’ part will not be up-
dated.
numbers. Therefore, the examples on page 176 have
been updated.
Frequency hopping will now be indicated with “h” (in-
stead of the previously used “0”.
Notes modified: If during a connection the radio cell is
changed, the parameters LAC, Cell, NCC BCC, PWR
and RXLev of the ‘Serving Cell’ part will not be up-
dated.
AT^SCKS
Notes regarding empty SIM card tray modified.
AT^SCTM
Chapter revised due to improved presentation of tem-
perature shutdown URCs.
perature shutdown URCs.
AT^SCID
AT^SGAUTH
Both commands now independent of PIN authentica-
tion
tion
Command added to list of PIN independent com-
mands
mands
Lists of result codes restructured.
Notification number 300 added: “Called party barred incoming call”
Notification number 300 added: “Called party barred incoming call”
*# codes
Chapter revised. Further examples added.