Siemens TC63 Manual De Usuario
TC63 AT Command Set
3. Status Control Commands
s
TC63_ATC_V00.490
Page 66 of 501
5/24/05
Confidential / Draft - Do not copy
3.
Status Control Commands
The AT Commands described in this chapter allow the external application to obtain various status information
from the TC63.
3.1
AT+CMER Mobile Equipment Event Reporting
This command controls details of the "
. If registered
via these commands the URCs are sent whenever a value of the related indicator changes.
In addition,
controls "
. For details refer to
and
, parameter
The read command returns the URC presentation mode
and among others, the indicator event reporting
status
The write command enables and disables the presentation of "
,
1
[,
[,...]]" URCs.
refers to the name of a "
" indicator and
is the new value of this indicator. After
and Section
Syntax
Unsolicited Result Code
+CIEV:
1
][,
[,...]]
A value of an indicator has changed. For more details see
.
Test Command
AT+CMER=?
Response(s)
+CMER:
(list of supported
s), (list of supported
s), (list of supported
s), (list of
s), (list of supported
s)
OK
Read Command
AT+CMER?
Response(s)
,
OK
Write Command
AT+CMER=
[
]]]]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07
!
%
%
%
%
%
%
!
%
!