Toshiba Magnia Z300 Manual De Usuario

154

c

Specifies whether the SCSI bus is to be terminated using the 
SCSI host adapter. Do not change this setting.

c

Specifies the SCSI device from which the system is to be 
booted.

c

Selects the SCSI ID of the device which boots the system. Do 
not change this setting.

c

Selects the LUN of the device which boots the system. Do not 
change this setting.

c

Specifies detailed configuration information for each SCSI 
device (SCSI ID).

c

Specifies the maximum synchronous transfer rate of the 
onboard SCSI controller.

c

Set this item to Yes to specify Wide SCSI (16 bit data width).

c

Set this item to Yes to make the adapter activate the disconnect/
reconnect function and permit multiple-command processing.

c

Specifies whether a start unit command is to be sent from the 
adapter to start the SCSI device.

c

Specifies whether to use the write-back cache.

c