TANDBERG D13841.08 Manual De Usuario
D13841.08
10.2007
10.2007
17
TANDBERG
3G GATEWAY
USER GUIDE
TANDBERG
3G GATEWAY
USER GUIDE
To start the 3G Gateway, simply connect the
power cable, and set the power switch button
(both at the rear) to position
power cable, and set the power switch button
(both at the rear) to position
I
.
On the front panel of the system the power
indicator LED, marked
indicator LED, marked
PWR
, will turn
GREEN
.
Power switch
Accessing the 3G Gateway
Forgot the Password?
The
pwrec
account is active for one minute following a restart.
Beyond that time, the system will have to be restarted to
change the password.
change the password.
3G Gateway Start-up
Reboot the 3G Gateway.
Connect to the 3G Gateway via the serial interface once it has
restarted.
Login with User Name
pwrec.
No password is required.
You will be prompted for a new password.
Starting Up the 3G Gateway
You may access the 3G
Gateway by entering the IP-
address of the 3G Gateway
in a standard WEB-browser.
You will then be asked to
enter a password. You will
need to enter
Gateway by entering the IP-
address of the 3G Gateway
in a standard WEB-browser.
You will then be asked to
enter a password. You will
need to enter
admin as
user name. The default
password for the 3G Gateway
is
password for the 3G Gateway
is
TANDBERG. Remember
that the password is case
sensitive. Note that you may
also use SSH and Telnet to
configure the 3G Gateway.
sensitive. Note that you may
also use SSH and Telnet to
configure the 3G Gateway.
USER NAME
is
admin
PASSWORD
. Default
password is
TANDBERG
(NB!
case sensitive)