Orbit Manufacturing ORBIT 2000 Manual De Usuario
Page 4 - 1
Installation
Orbit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
4.0 Installation Precautions
W A R N I N G
WARNING: To avoid injury to yourself or damage to the equipment, please
read and understand the instructions in this manual before you
attempt to install, operate or service the laminator!
1. The GBC Orbit™ 2000 System may be installed only by a qualified ( as defined below ) GBC employed technician.
2. Any moving or un-installing of the equipment may also, only be done by a qualified ( as defined below ) GBC
employed technician.
employed technician.
3. Once the machine is installed, all cables remaining on the floor from the electrical cabinet to the machine must be
covered, to avoid any accidents.
covered, to avoid any accidents.
Qualified
• Any engineer that has experience with electrical and mechanical design of lamination equipment. The engineers
should be fully aware of all aspects of safety with regards to lamination equipment.
• Any commissioning or service engineer must be of competent nature, trained and qualified to GBC Pro-Tech
standards to fulfill that job. This person will have completed and passed the full service training course from GBC Pro-
Tech.
Tech.
• Any GBC Technician, GBC Specialist, and / or GBC Pro-Tech Technician that has been through the GBC
Pro-Tech service training course.