Namco Bandai Games 90500150 Manual De Usuario
Page 34
4. MOVING THE MACHINE
l
This equipment is fitted with castors to make it easier to move. Take care when
moving the equipment on an inclined floor.
l
The overall height of this equipment is 2240mm. Take care of any overhead
obstructions. (e.g. Light Fittings, Electric Cables etc.)
l
Before moving, ensure that the game is seperated into 4 parts: Header Assy,
Monitor Cabinet and Seat Assemblies
5. INSTALLATION
Notes on Installation
l
NEVER turn the power to the machine ON until sinstallation has been
completed
l
In order to prevent possible electric shocks, be sure that the machine is
connected to the mains supply with a securely connected earthed plug.
l
So that customers are not injured, ensure that there is at least 500mm
sepearation between other machines or walls.
i
In order to avoid damage to the machine due to mis-operation, ensure that the
voltage of the mains supply is 230volts AC.
voltage of the mains supply is 230volts AC.
NOTE
•
If the location site of this machine has a polished floor, it is
recommended that rubber pads are fitted under the level asdjusters to
prevent the machine sliding on the floor.
recommended that rubber pads are fitted under the level asdjusters to
prevent the machine sliding on the floor.
•
In order to gain access to the Power Supply and CPU assemblies,
ensure that the rear of the machine is seperated from a wall or other
machine by at least 500mm
ensure that the rear of the machine is seperated from a wall or other
machine by at least 500mm