Lenmar Enterprises LENMAR iBatteryCase-iPhone 4 Battery Case BC4 Manual De Usuario

USB

Model: BC4

iBatteryCase - iPhone® 4 Battery Case

PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT 

OPERATING INSTRUCTIONS FOR YOUR UNIT.

Thank you for purchasing the iPhone 4, iBatteryCase. The iBatteryCase case offers the convenience of an 

external battery built into the full protection of a hard case. You can use it as a case all the time and enjoy 

the convenience of extra battery power when you need it.

Included in the package you have purchased:

iBatteryCase, USB charging / Sync cable and User manual

Note: Prior to initial use, fully charge your iBatteryCase before connecting to your iPhone.

You can charge the iBatteryCase case with the Micro USB to USB cable included with the case. Just plug the Micro 

USB into the case, and the other ends USB into a computer USB port or into a wall plug style adapter that has a 

USB output. 

The LED status indicators show the current charging status of the case. The LED’s will blink and become steady as 

the case charges, from right to left the 1st LED , 2nd LED, 3rd LED and finally the 4th LED. Once the 4th LED has 

become steady, the charging process has finished. 

With the iBatteryCase connected to the iPhone charging is as follows.

First the iPhone will receive about 2.5 hrs of charge and then the iBatteryCase begins to charge. 

Your iBatteryCase will always drain first until its power is 5%, and then your iPhone switches to its main battery. 

With the built in “ON / OFF” button you have the option of 

using the iBatteryCase when you need it. When you need 

an extra charge in your phone, just push the button and 

hold for two seconds to turn “ON” and the iPhone case will 

proceed to charge your main battery. When you are ready 

to turn it “OFF,” just hold the button again for two seconds 

and the iBatteryCase will shut “OFF.”

Slide your iPhone facing you into the iBatteryCase from 

the  top  making  sure  the  30  pin  connector  and  the 

bottom  of  the  iPhone  line  up  and  connect  correctly. 

Then take the top cover aligning it into the channels of 

the  lower  case,  slide  down  until  it  sets  firmly  into  the 

bottom half of the case. Once connected you can push 

the “ON / OFF” button located on the back of the case 

once  to  turn  it “ON.”  You  should  now  see  the  charge 

indicator icon appear on your iPhone.

The integrated LED status indicator tells you exactly how much battery power is 

left in your case. Simply press the “ON / OFF” button. The 1st LED will indicate 

20%  or  less  charge  remaining,  the  2nd  LED  will  indicate  between  40  –  60% 

charge remaining and the 3rd LED will indicate 60 -80% charge remaining, and 

the 4th LED will indicate 80-100% charge remaining.

Lenmar product is warranted to be free of defective parts and workmanship for stated period from the original date of purchase. Warranties are not 

transferable.  The warranty excludes damage resulting from accident, misuse, modification, delay or loss of use, damage to equipment or by normal wear 

and tear.

ALL WARRANTY REQUESTS MUST BE SUBMITTED AT: www.lenmar.com/warranty

INCLUDE A COPY OF ORIGINAL PROOF OF PURCHASE WITH RETURNED BATTERY OR THE CLAIM WILL BE DENIED.

Copy of Proof of Purchase from an authorized Lenmar Dealer must include the following:

- The company where the product was purchased.

- The date of purchase.

- The model number of the product purchased.

- Send back the product freight prepaid (we recommend insuring the package as Lenmar will not be responsible for shipments lost or damaged in transit).

Include $10.00 payable to Lenmar Battery Solutions for processing fee for ship to address in the Continental United States. 

Include $15.00 for ship to address in Hawaii, Alaska or Canada.

Send to:

Lenmar Battery Solutions

Attn: Return Department

4035 Via Pescador

Camarillo, CA 93012-5050

Use preprinted Lenmar shipping label or clearly print your RA Number on the outside of the shipping carton.

Proposition 65 Notice (California)

The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice 

Foundation against multiple electronics and appliance manufacturers

For additional questions, comments or to explore other Lenmar battery solutions, visit our web site at: www.lenmar.com or 

call 800/424-2703 from 9AM – 5PM PST.

Enjoy the convenience of syncing your iPhone without ever removing the case.

Using  the  supplied  cable,  you  can  charge  and  sync  your  iPhone  to  iTunes 

without ever removing it. Just plug the Micro USB cable into the case and the 

other end into your computer’s USB slot.

 

Cell type:

Input:

Output:

Capacity:

Dimensions:

Weight:

Compatibility:

Lithium-Polymer Battery
DC 5V500mA
DC 5V500mA
1700mAh
L128 x W62 x T17.6mm
65g
iPhone 4

Standby:

Talk Time:

Internet Use:

Audio Play:

Video Play:

Up to 210 hours* 
Up to 5 hours and on the 3G network. 
Up to 10 hours on the 2G network.
Up to 4.5 hours and on the 3G network. 
Up to 7 hours on Wi-Fi.
Up to 28 hours*
Up to 7 hours*

*All above times can vary due to device settings, location, and signal strength.

310-541-33-0903 r1 y1

Lithium-Polymer battery must be

recycled or disposed of properly.

On/Off Button

30 pin connector

LED

Status

Indicator

On/Off Button

LED Status Indicator

USB