Graco GE-DS-242-POE Manual De Usuario

 

Chapter 4: Web-Based Management 

GE-DS-242-PoE Managed Ethernet Switch User Manual 

77 

This page includes the following fields: 
 

The user must enable the RSTP function first before configuring the 
related parameters. 

A value used to specify the spanning tree protocol, the original 
spanning tree protocol (STP, 802.1d) or the rapid spanning tree protocol 
(RSTP, 802.1w). 

The switch with the lowest value has the highest priority and is selected 
as the root. If the value is changed, the user must reboot the switch.  

The value must be a multiple of 4096 according to the protocol 
standard rule. 

The number of seconds a switch waits without receiving Spanning-tree 
Protocol configuration messages before attempting a reconfiguration.  

Enter a value between 6 through 40.   

The time that controls the switch to send out the BPDU packet to check 
RSTP current status.  

Enter a value between 1 through 10. 

The number of seconds a port waits before changing from its Rapid 
Spanning-Tree Protocol learning and listening states to the forwarding 
state.  

Enter a value between 4 through 30. 

 

Follow the rule as below to configure the MAX Age, Hello Time, and Forward 

Delay Time.  

2 x (Forward Delay Time value -1) > = Max Age value >= 2 x (Hello Time value +1). 

 

Each switch in a spanning-tree adopts the Hello Time, Forward Delay time, and 

Max Age parameters of the root bridge, regardless of how it is configured.  

 

This page provides a status overview for all RSTP bridge instances. 
The displayed table contains a row for each RSTP bridge instance, where the column 
displays the following information: 
The RSTP Bridge Status screen in Figure 4-37 appears.