Graco 3A2894F - ExactaBlend AGP Advanced Glazing Proportioner Manual De Usuario

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When 
these symbols appear in the body of this manual, refer back to these Warnings. Product-specific hazard symbols and 
warnings not covered in this section may appear throughout the body of this manual where applicable.

This equipment must be grounded

.

 Improper grounding, setup, or usage of the system can cause elec-

tric shock.
•

Turn off and disconnect power cord before servicing equipment.

•

Connect only to grounded electrical outlets.

•

Use only 3-wire extension cords.

•

Ensure ground prongs are intact on power and extension cords.

•

Do not expose to rain. Store indoors

High-pressure fluid from dispensing device, hose leaks, or ruptured components will pierce skin. This 
may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical 
treatment.
•

Do not point dispensing device at anyone or at any part of the body.

•

Do not put your hand over the fluid outlet.

•

Do not stop or deflect leaks with your hand, body, glove, or rag.

•

Follow the Pressure Relief Procedure when you stop dispensing and before cleaning, checking, or 
servicing equipment. 

•

Tighten all fluid connections before operating the equipment.

•

Check hoses and couplings daily. Replace worn or damaged parts immediately.

Moving parts can pinch, cut or amputate fingers and other body parts.
•

Keep clear of moving parts.

•

Do not operate equipment with protective guards or covers removed.

•

Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, 
follow the Pressure Relief Procedure and disconnect all power sources.