Global Upholstery Co. 2801330 Manual De Usuario

 

 

 

The AT/ATX power connector is used to connect a chassis power On/Off button using an 

adapter cable and is configured through the JP6 jumper. The AT/ATX power connector 

has two operational modes: 

1. Using 

ATX power: AT/ATX power connects to an externally implemented power 

switch, and the JP6 jumper should be left open. 

2. Using 

AT power: The pins on JP6 are shorted by a jumper cap. JP6 should be 

shorted by default as the AMD Southbridge is designed without the consideration 

for a power button signal. The shorted JP6 provides a hardware feedback to 

initiate the system. The power on/off function is then managed by the AT power 

switch button. 

 

After the DIMM modules have been installed 

and after the internal peripheral connectors 

have been connected to the peripheral devic es and the jumpers have been configured, 

 

To mount a board into a chassis, please refer to the chassis user guide that came with the 

product. 

A PS/2 keyboard and a PS/2 mouse can be connected to the appropriate PS/2 connector 

on the rear panel.