Gateway E-3200 Manual De Usuario
System Components 23
Installing Memory and Hardware
The E-3200 system board supports:
•
3.3-V, 168-pin unbuffered, Synchronous Dynamic Random Access
Memory (SDRAM) Dual In-line Memory Modules (DIMMs).
Memory (SDRAM) Dual In-line Memory Modules (DIMMs).
•
16 MB and 32MB (16 bit technology)
•
64MB and 128 MB (64 bit technology)
•
Non-ECC (64 bit) and ECC (72 bit) memory
•
Single- or double-sided configurations
•
384MB maximum system memory
You can use 16-MB, 32-MB, 64-MB, and 128-MB DIMMs in any
combination, bank, or order to expand the SDRAM up to 384 MB.
combination, bank, or order to expand the SDRAM up to 384 MB.
ECC Memory
With error checking and correcting (ECC) memory, multiple bit errors and
single bit errors can be detected and corrected. The BIOS automatically
detects if ECC memory is installed and provides a Setup utility option to
enable error checking. Non-ECC memory does not provide error checking
capability.
single bit errors can be detected and corrected. The BIOS automatically
detects if ECC memory is installed and provides a Setup utility option to
enable error checking. Non-ECC memory does not provide error checking
capability.
DIMM Size
Non-ECC
Configuration
Configuration
ECC Configuration
16 MB
2 Mbit x 64
2 Mbit x 72
32 MB
4 Mbit x 64
4 Mbit x 72
64 MB
8 Mbit x 64
8 Mbit x 72
128 MB
16 Mbit x 64
16 Mbit x 72
Setup Utility Memory Error Detection
Mode Setting
Mode Setting
ECC Disabled
ECC Enabled
Non-ECC DIMM
No error detection
N/A
ECC DIMM
No error detection
Single-bit error correction,
multiple-bit error detection
multiple-bit error detection
Important!
66 MHz FSB processors
can be paired with 66 or
100 MHz SDRAM, but 100
MHz FSB processors
should be paired only with
100 MHz SDRAM.
can be paired with 66 or
100 MHz SDRAM, but 100
MHz FSB processors
should be paired only with
100 MHz SDRAM.