Garmin fenix 2 Manual De Propietario

By default, the time is set automatically when the device 

acquires satellite signals.

Select   > Settings > System > Clock > Set Time > 

Manual.

Select Time, and enter the time of day.

Select   > Settings > Alarm > Status > On.

Select Time, and enter a time.

Select   > Settings > System > Backlight.
Mode: Sets the backlight to turn on manually or for keys and 

alerts.

Timeout: Sets the length of time before the backlight turns off.

The device sounds include key tones, alert tones, and 

vibrations.

Select   > Settings > System > Sounds.

You can customize units of measure for distance, pace and 

speed, and weight.

Select   > Settings > System > Units.

Select a measurement type.

Select a unit of measure.

By default, the device uses GPS to locate satellites. For 

increased performance in challenging environments and faster 

GPS position location, you can enable GPS and GLONASS. 

Using GPS and GLONASS reduces battery life more than using 

only GPS.

Select   > Settings > System > GLONASS.

Select   > Settings > System > Format.
Pace/Speed Preference: Sets the device to display speed or 

pace for running, cycling, or other activities. This preference 

affects several training options, history, and alerts.

Start of Week: Sets the first day of the week for your weekly 

history totals.

Select   > Settings > System > Data Recording.
Smart: Records key points where you change direction, pace, 

or heart rate. Your activity record is smaller, allowing you to 

store more activities on the device memory.

Every Second: Records points every second. It creates a very 

detailed record of your activity and increases the size of the 

activity record.

Battery type

Rechargable, built-in lithium-ion battery

Battery life

Over 4 months watch only mode
Up to 30 days in watch mode with activity 
tracking
Up to 40 hours in UltraTrac mode
Up to 24 hours using GPS only
Up to 20 hours using GPS and GLONASS

Operating 
temperature range

From -20º to 60ºC (from -4º to 140ºF)

Charging 
temperature range

From 0º to 40ºC (from 32º to 104ºF)

Water rating

5 ATM*

*The device withstands pressure equivalent to a depth of 50 m. 

Battery type

User-replaceable CR2032, 3 volts

Battery life

1 year (1 hour per day)

Water rating

3 ATM*
NOTE: This product does not transmit heart 
rate data while swimming.

Operating temperature 
range

From -20° to 60°C (from -4° to 140°F)

Radio frequency/
protocol

2.4 GHz ANT+ wireless communications 
protocol

*The device withstands pressure equivalent to a depth of 30 m. 

Avoid extreme shock and harsh treatment, because it can 

degrade the life of the product.
Avoid pressing the keys under water.
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that 

can damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to 

chlorine, salt water, sunscreen, cosmetics, alcohol, or other 

harsh chemicals. Prolonged exposure to these substances can 

damage the case.
Do not store the device where prolonged exposure to extreme 

temperatures can occur, because it can cause permanent 

damage.

Wipe the device using a cloth dampened with a mild 

detergent solution.

Wipe it dry.

You must unsnap and remove the module before washing the 

strap.
A build up of sweat and salt on the strap can decrease the 

ability of the heart rate monitor to report accurate data.

• Go to 

 for detailed washing 

instructions.

• Rinse the strap after every use.
• Machine wash the strap after every seven uses.
• Do not put the strap in a dryer.
• When drying the strap, hang it up or lay it flat.
• To prolong the life of your heart rate monitor, unsnap the 

module when not in use.

Do not use a sharp object to remove batteries.
Keep the battery away from children.

14

Device Information