Garmin fenix 2 Manual De Propietario

WAAS: Sets the device to use Wide Area Augmentation 

System (WAAS) GPS signals. For information about WAAS, 

.

Hot Keys: Allows you to customize the hold function of the 

DOWN key.

USB Mode: Sets the device to use mass storage mode or 

Garmin mode when connected to a computer.

Map: Allows you to change the appearance of the map.
Pos. Format: Sets the position format, datum, and spheroid 

used to calculate your GPS coordinates.

Menu: Allows you to customize the items that appear in the 

main menu.

Reset: Allows you to reset user data and settings.
About: Displays device, software, and license information.

You can customize the hold function of the DOWN key. By 

default, holding DOWN marks a waypoint.

Hold MENU.

Select Settings > System > Hot Keys > Hold Down.

Select a function.

To open the map settings, hold MENU, and select Settings > 

System > Map.
Orientation: sets how the map is shown on the page. North Up 

sets how the map shows north at the top of the page. Track 

Up shows your current direction of travel toward the top of 

the page.

Auto Zoom: Automatically selects the appropriate zoom level 

for optimal use on your map. When Off is selected, you must 

zoom in or out manually.

Points: Sets the zoom level for points on the map.
Track Log: Allows you to show or hide tracks on the map.
Go To Line: Allows you to select how the course appears on 

the map.

Map Colors: Allows you to select whether land or water is 

highlighted on the map.

NOTE: Do not change the position format or the map datum 

coordinate system unless you are using a map or chart that 

specifies a different position format.
Hold MENU, and select Settings > System > Pos. Format.
Format: Sets the position format in which a given location 

reading appears.

Datum: Sets the coordinate system on which the map is 

structured.

Spheroid: Shows the coordinate system the device is using. 

The default coordinate system is WGS 84.

You can add, delete, or move items in the main menu.

Hold MENU.

Select Settings > System > Menu.

Select a menu item.

Select an option:
• Select Move Up or Move Down to change the location of 

the item in the list.

• Select Remove to delete an item from the list.
• Select Insert to add an item to the list.

You can restore all of the device settings to the factory default 

values.

Hold MENU.

Select Settings > System > Reset > All Settings.

The device is compatible with these optional, wireless ANT+ 

accessories.
• Heart rate monitor, such as HRM-Run (

)

• Bike speed and cadence sensor (

• Foot pod (

)

• Power sensor, such as Vector
• tempe wireless temperature sensor (

)

For information about compatibility and purchasing additional 

sensors, go to 

Before you can pair ANT+ sensors, Bluetooth wireless 

technology must be turned off (

).

The first time you connect a sensor to your device using ANT+ 

wireless technology, you must pair the device and sensor. Once 

paired, the device connects to the sensor automatically when 

you start an activity and the sensor is active and within range.
NOTE: If a heart rate monitor was bundled with your device, the 

included heart rate monitor is already paired with your device.

If you are pairing a heart rate monitor, put on the heart rate 

monitor (

).

The heart rate monitor does not send or receive data until 

you put it on.

Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other ANT+ sensors 

while pairing.

Hold MENU.

Select Settings > Sensors.

Select your sensor.

Select New Search.
When the sensor is paired with your device, the sensor 

status changes from Searching to Connected. Sensor data 

appears in the data page loop or a custom data field.

The tempe is an ANT+ wireless temperature sensor. You can 

attach the sensor to a secure strap or loop where it is exposed 

to ambient air, and therefore, provides a consistent source of 

accurate temperature data. You must pair the tempe with your 

device to display temperature data from the tempe.

NOTE: If you do not have a heart rate monitor, you can skip this 

task.
You should wear the heart rate monitor directly on your skin, 

just below your breastplate. It should be snug enough to stay in 

place during your activity.

Snap the heart rate monitor module 

À

 onto the strap.

14

ANT+ Sensors