Cyclades AlterPath family of KVM products Manual De Usuario

Advanced Installation Procedures

117

                                 Connecting AlterPath PMs to the KVM/net

 

 

You can control an AlterPath Power Management (PM), intelligent power 
distribution unit (IPDU), by connecting it to the AUX port on the KVM/net. 
By daisy-chaining any combination of PM models, you can control up to 128 
outlets from one KVM/net.

T

1. Use an RJ-45 CAT5 cable to connect the AUX port on the KVM/net to the 

In port of your AlterPath PM.

2. Configure the AUX port for power management. See “To Configure the 

After the PM is connected, you may want to perform one or more of the 
following tasks:

Install multiple PM units.

Manage the power of devices connected to 
configured PM units.

• Web Manager – “IPDU Power 

• OSD – “Power Management Menu” on 

Control the power of a device while 
connected to it through a KVM port.

• Web Manager – “To Power On, Power 

• OSD – “To Power On, Power Off, Lock,