CyberPower Network Management Card Manual De Usuario

5 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 2. The SNMP card setting window. 

 

 

6. First, choose either IP or MAC address from the device address option. 

7. Then click on each checkbox to modify the IP, subnet mask or gateway address. Enter the 

new addresses into the corresponding fields. 

8. You will need to input password for the SNMP card (Figure 3) in the authentication window, 

as shown in figure 3.    *Default User name: cyber; Default Password: cyber 

 

 

 

 

 

 

 

Figure 3. Authentication window. 

 

9.   If you set IP address successfully, you will receive the IP set up OK message, as shown in 

figure 4.