Cumberland Stove Works MF3700 Manual De Usuario

Unpack all hardware located in the units hopper and ash 

pan. The following should be included:

4 - legs (710008) w/ levelers (725010)

4 - tie-down straps (700136)

1 - firepot cleaning rod (700076)

1 - cleaning rod spring (720053)

1 - hopper lid handle (730006)

1 - power cord (720045)

1 - scraper tool (700225)

1 - door (700311) with glass (720002)

and handle (700351, 700359)

1 - controller (730053)

1 - steel mounting bracket (700349)

1 - pre-made parts bag (small) which includes:

4 - 1/4-20 x 2” tie-down bolts (725015)

2 - 8-32 x 3/8” hopper lid handle bolts (725012)

12 - 5/16-18 x 3/4” leg bolts (1501)

4 - #8-18 controller bracket screws (725027)

note: Stove is heavy.  team lifting is recommended.
1.  gently tilt the stove on its side.
2.  Assemble  the  legs  using  provided  (12)  leg  bolts  as

shown in figure 4.

 

3.  After all bolts have been tightened, set the stove back 

up on its legs.

1.  Using a Phillips screwdriver, attach hopper handle to 

hopper door using the pre-drilled holes. See figure 5.

1. Thread spring over non-threaded end of rod.
2.  Place  threaded  end  of  firepot  cleaning  rod  through

decorative casting and screw into fire pot. See figure

6.

1. Plug power cord into the back of stove. See figure 7.

Figure 4: Leg Assembly

Figure 6: Ash Shuttle Rod Assembly

Figure 5: Hopper Door Handle Assembly

Power Cord Receptacle

Figure 7: Ash Shuttle Rod Assembly