Crestron electronic Surround Sound Tuning Kit Manual De Usuario

Crestron 

 

Professional Surround Sound Tuning Kit

When the Pro Sound Tools application is launched it will provide a window for 
selecting the current system configuration (for example, 5.1, 6.1, 7.1 plus additional 
rooms, etc.). When a center speaker or subwoofer is not used, un-check the Front 
Center Speaker and/or Subwoofer checkboxes as appropriate, in order to enable 
“phantom” center and “phantom” subwoofer. The phantom setting will route center 
and/or subwoofer information to the main speakers. 

Any subwoofer low-pass filter should be defeated or set to the THX setting 
(sometimes called “LFE input”). If the subwoofer low-pass filter cannot be defeated, 
set it to its maximum frequency. Any subwoofer gain settings should be set to their 
nominal position or at 12 o’clock on a conventional level control. Also, if the 
subwoofer has any sort of “Auto Standby” or sleep mode that turns the power to the 
subwoofer off after it does not receive any signal for some period of time, please 
disable this mode. This will ensure that the subwoofer is always on, which is 
important when taking measurements. The subwoofer may be set back to Auto after 
measuring is complete. 

Click Room Equalization Setup… to begin the process.  

NOTE:  If you have not already done so, the application will prompt you to install 
the special file for the microphone that came with your Professional Surround Sound 
Tuning Kit. 

NOTE:  The Volume control will function until the process gets to the Job 
Information screen, at which point the use of the volume control is disabled until the 
filters are transferred (refer to “Save Results” on page 11). 

 

The Job Information screen is used to record the name of the customer or job and the 
name of the technician performing the job. 

Click the forward arrow to proceed to the Options screen. 

•  5