Crestron electronic TPS-GA-TPI Manual De Usuario

Crestron TPS-GA-TPI  

Isys

®

 G-Series Touchpanel Interface

•  41 

Crestron recommends using the latest programming software and that each device 
contains the latest firmware to take advantage of the most recently released features. 
However, before attempting to upload or upgrade it is necessary to establish 
communication. Once communication has been established, files (for example, 
programs, projects or firmware) can be transferred to the control system (and/or 
device). Finally, program checks can be performed (such as changing the device ID 
or creating an IP table) to ensure proper functioning. 

Use Crestron Toolbox for communicating with the TPS-GA-TPI; refer to the 
Crestron Toolbox help file for details. There are three methods of communication. 

 

NOTE:  Required for initial setup of Ethernet parameters. 

PC RUNNING

SERIAL VIA CRESTRON

CABLE STCP-502PC

OR EQUIVALENT

CRESTRON TOOLBOX

TPS-GA-TPI

 

•  The RS-232 port on the TPS-GA-TPI connects to the serial port on the PC 

via a serial cable (Crestron STCP-502PC or equivalent). 

•  Use the Address Book in Crestron Toolbox to create an entry using the 

expected serial communication protocol (RS-232, auto-detect baud rate, no 
parity, 8 data bits, 1 stop bit, XON/XOFF disabled, RTS/CTS disabled).  

•  Display the TPS-GA-TPI’s “System Info” window (click the 

 icon); 

communications are confirmed when the device information is displayed. 

 

PC RUNNING

CRESTRON TOOLBOX

CONTROL SYSTEM

TPS-GA-TPI

 

•  TPS-GA-TPI connects to control system via Cresnet. 
•  Establish communications between the PC and the control system as 

described in the latest version of the 2-Series Control Systems Reference 
Guide (Doc. 6256).