Compex Systems WP18 Manual De Usuario
Chapter 2
Let’s Get Going - Hardware Setup
6
Option Two: Using Compex PoE to supply power to the unit
Compex Power-Over-Ethernet (PoE) is fully compatible with your Compex
WP18. This accessory supplies operational power to the wireless access point via
the Ethernet cable connection.
WP18. This accessory supplies operational power to the wireless access point via
the Ethernet cable connection.
Users who have already purchased the Compex PoE and who wish to use it to
supply power to the Compex WP18 may follow the installation procedures as
shown below:
supply power to the Compex WP18 may follow the installation procedures as
shown below:
Follow the same procedure as described in the Option One. And also refer to
Appendix C (in user’s manual) for configuring the jumper JP01 before
proceeding to Step 2.
Appendix C (in user’s manual) for configuring the jumper JP01 before
proceeding to Step 2.
Use an RJ45 Ethernet cable to connect one end of the cable to the Ethernet
socket of the Injector and the other end to the Port 4 (PoE Port) of Compex
WP18.
socket of the Injector and the other end to the Port 4 (PoE Port) of Compex
WP18.
For Compex PoE, the recommended length of the RJ45 Category 5 cable is
up to 50 metres.