Compex Systems 802.11N Manual De Usuario

 

Backup Configuration: click Download button to export the current configuration to a file.   

Upload Configuration: click Browse button to navigate to and select the new configuration file 

or specify the full path to the configuration file location.   

Activating the Upload button will transfer new configuration file to the system.   

New configuration will be effective after the Apply button is activated and system reboot cycle is 

completed. Previous system configuration is deleted after Apply button is activated. It is highly 

recommended to backup the system configuration before uploading the new configuration.   

Use only configuration backups of the same type device - configuration backed up from 

PowerStation2 suits only PowerStation2, but not LiteStation2 or LiteStation5! Behavior may be 

unpredictable when mixing configurations from different type devices.   

 

The controls in this section are dedicated for the device maintenance routines: rebooting, resetting, 

generating of the support information report.   

 

activate Reboot control in order to initiate full reboot cycle of the device. Reboot effect 

is the same as the hardware reboot which is similar to the power off - power on cycle. The system 

configuration is not modified after the reboot cycle completes. Any non-applied changes will be 

lost.  

 

 activate Reset to Defaults control in order to initiate reset the device to factory 

defaults routine. Reset routine initiates system Reboot process (similar to the power off - power on 

cycle). The running system configuration will be deleted and the default system configuration (all 

the system settings with no exception) will be set.   

 

After the Reset to Defaults routine is completed, the device system will return to the default IP 

configuration (192.168.168.1/255.255.255.0) and will start operating in Station-Bridge mode. It is 

highly recommended to backup the system configuration before the Reset to Defaults is initiated.