Compex Systems WPE53G Manual De Usuario

 

Page 95 

 

Begin by verifying that every access point in the network is properly 

configured to connect to its individual broadband Internet account.  

 

Secondly ensure that either: 

•  each access point is connected to an Ethernet port in the network 

OR 

•  the access points are wired to each other. 

 

Then all the access points has to have the DHCP server, followed by the 

Parallel Broadband feature, enabled through the web-based 

configuration. Please note that all the access points need to be 

interconnected. 

 

Step 1: 

 

Select Parallel Broadband from the CONFIGURATION command menu.  

 

Step 2: 

 

Select  Enable and click the Apply 

button. 

 

Step 3: 

 

Repeat Step 1 and Step 2 for the rest of 

the access points.  

 

New users will then be assigned to the 

access point with the smallest load, 

ensuring that each access point has 

approximately the same number of 

users. 

   

 

 

 

 

 

Important: 
Implementing Parallel Broadband is redundant if 
there is only 1 access point.