Cobra Electronics King 2003 Manual De Propietario

 

                35 

14. Reinstall new bearings, seal and impeller. Clean all threads and use green 

(wicking / bearing retainer) thread locker. 

15. Using a liberal amount of grease on the outside seal, bearings and inside of 

case, reinstall bearing assembly by using a 0.500” ID by 1.000” OD steel tube 2” 
long and tap on end of tube per figure 25.  

16. Re-assemble in same order of disassembly. Clean all threads and use green 

(wicking / bearing retainer) thread locker on the belt retainer screw.