FMC Corporation - Talstar 80 Manual De Usuario
Proline Promass 80 PROFIBUS PA
Technical data
115
10.1.12 Certificates and approvals
CE mark
The measuring system is in conformity with the statutory requirements of the EC Directives.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
C-tick mark
The measuring system is in conformity with the EMC requirements of the "Australian
Communications and Media Authority (ACMA)".
Communications and Media Authority (ACMA)".
Ex approval
Information about currently available Ex versions (ATEX, FM, CSA, IECEx, NEPSI) can be supplied
by your Endress+Hauser Sales Center on request. All information relevant to explosion protection
is available in separate Ex documents that you can order as necessary.
by your Endress+Hauser Sales Center on request. All information relevant to explosion protection
is available in separate Ex documents that you can order as necessary.
Sanitary compatibility
• 3A authorization (all measuring systems, except Promass H)
• EHEDG-tested (all measuring systems, except Promass H and E)
• EHEDG-tested (all measuring systems, except Promass H and E)
Pressure device approval
Flowmeters with a nominal diameter smaller or equal DN 25 are covered by Art. 3(3) of the
European directive 97/23/EC (Pressure Equipment Directive) and are designed according to sound
engineer practice. For larger nominal diameters, optional approvals according to Cat. II/III are
available when required (depends on fluid and process pressure).
European directive 97/23/EC (Pressure Equipment Directive) and are designed according to sound
engineer practice. For larger nominal diameters, optional approvals according to Cat. II/III are
available when required (depends on fluid and process pressure).
Optionally flowmeters in accordance to the guidelines AD 2000 are available on request (Promass
F and M only).
F and M only).
Functional safety
SIL -2:
In accordance with IEC 61508/IEC 61511-1 (FDIS)
In accordance with IEC 61508/IEC 61511-1 (FDIS)
Other standards and
guidelines
guidelines
• EN 60529
Degrees of protection by housing (IP code)
• EN 61010-1
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and
Laboratory Procedures
Laboratory Procedures
• IEC/EN 61326
"Emission in accordance with requirements for Class A".
Electromagnetic compatibility (EMC requirements).
Electromagnetic compatibility (EMC requirements).
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with
analog output signal.
analog output signal.
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics