Cisco Systems 3527 PRI Guía De Instalación

 shows the front panel of the Cisco Unified Videoconferencing 3500 Gateway

 

unit. 

 

describes the components of the front panel.

 shows the rear panel components of the Cisco Unified Videoconferencing 3527 PRI Gateway 

unit. 

 describes these components.

10/100 BaseT connector An RJ-45 connector that provides the primary Ethernet connection for the IP 

network port.

SERIAL connector

A DB-9 connector that allows you to connect a PC terminal for local 
configuration.

RST button

Allows you to reset the Cisco Unified Videoconferencing 3500 Gateway unit 
manually. 

GK Reg LED

Lights green when the Cisco Unified Videoconferencing 3500 Gateway unit 
is registered with a gatekeeper.

CD LED

Lights green when a PRI or BRI line is enabled and a carrier signal is 
detected

ACT LED

Lights green to indicate that there are active calls in the Cisco Unified 
Videoconferencing 3500 Gateway unit.

ALARM LED

Lights green to indicate that an error has occurred and the Cisco Unified 
Videoconferencing 3500 Gateway unit requires resetting.

10/100 BaseT LEDs

The top part of the 10/100 BaseT connector contains two LED indicators. 
The left-hand LED lights green when the local IP network link is active. The 
right-hand LED lights green if the connection speed is 100 Mbps, and is off 
when the connection speed is 10 Mbps. 

10/100 Base T

SERIAL

RST

ACT

ALARM

CD

GK Reg

157264

PWR

PORT-1

PORT-2

ACT

157266

D-Ch

ALARM

ACT

D-Ch

ALARM