Cisco Systems 2140 Manual De Usuario

Do not power on the unit, yet. 

An exposed wire lead from a DC-input power source can conduct harmful levels of electricity. Be sure 
that no exposed portion of the DC-input power source wire extends from the terminal block plug. 
Statement 122

Secure all power cabling when installing this unit to avoid disturbing field-wiring connections. 
Statement 38

Proceed to the next section, “

,” to continue the installation.

This section describes how to connect your Cisco ADE 2130 and 2140 Series appliance to the network 
and the appliance console. It includes the following sections:

Do not work on the system or connect or disconnect cables during periods of lightning activity. 
Statement 1001

This section describes how to connect the Cisco ADE 2130 and 2140 Series appliance network interface 
connector (NIC) port.

The RJ-45 port supports standard straight-through and crossover Category 5 unshielded twisted-pair 
(UTP) cables. Cisco does supply one Category 5 UTP cable (yellow). If more UTP cables are needed, 
these cables are available commercially. (See 

 for information about Category 3, 

4, 5, 5e, and 6 cables.)

To connect the cable to the appliance network interface connector (NIC) port:

Confirm that the appliance is turned off.

Connect one end of the cable to the NIC port on the appliance. (For cable pinouts, see the 

.)

Connect the other end to a hub or switch in your network.