Cisco Systems 2200 Manual De Usuario
2-46
User Guide for Cisco Digital Media Encoder 2200
OL-17938-01
Chapter 2 Getting to Know the Cisco Digital Media Encoder 2200
Encoder Preset (A, B, and C)
The page will refresh and you will be prompted to reboot the encoder. Your changes will not take effect
until the system is restarted.
until the system is restarted.
Click the Reboot Now link to restart the system and apply the Computer Name change.
While the encoder is restarting, the following message will appear in the web interface.
Note
The restart process takes approximately two minutes to complete.
When encoder has restarted, you will be returned to the Login screen.
Note
If you close your web browser and later want to log into the Niagara SCX Web Interface, you will need
to use the new computer name you created to access the encoder.
to use the new computer name you created to access the encoder.
Cisco Digital Media Encoder 2200 Properties
The encoder Properties section has two fields: User Name and Serial Number. Only the User Name
field allows modification, which changes the User Password from the factory default.
field allows modification, which changes the User Password from the factory default.
•
•
Changing the Login Password from the Factory Default
Click the admin link in the User Name field. You will be presented with a new screen that allows you
to change your login password for the Niagara SCX Web Interface.
to change your login password for the Niagara SCX Web Interface.
Note
You cannot change the User Name for the Niagara SCX Web Interface.