Falcon F1000 Manual De Usuario

www.rletech.com

18

970.484.6510

1

  System Overview

The rear panel of the F3400/F1000 houses a pair of green LEDs. The chart below tracks 

indicator status when the corresponding green LED is illuminated:

Figure 1.3 Rear LED Indicator and Status



SW1-1:   EIA485 Termination switch should be On (down) if the F3400/F1000 is the end 

device on an EIA485 network. The switch should in the OFF (up) position if the device is at 

the beginning or in the middle of an EIA485 network.



SW1-2:   EIA485 Termination switch should be On (down) if the device is connected via a 

four wire connection. OFF (up) if the device is connected via a two wire connection. 

Figure 1.4 SW1 Switch Is On and SW2 Switch Is Off

Table 1.2 Rear Panel Status Indicators

EIA232 or EIA485 TX (COM1) Interface 

Data is being transmitted.

EIA232 or EIA485 RX (COM1) Interface 

Data is being received.