Casio Network Card YW-2L Manual De Usuario
19
Subsequent Wireless LAN Connection between the Data
Projector and Four Computers
Projector and Four Computers
Important!
You can use the following procedure when the following condition exists.
z You already have performed the procedure under “First Wireless LAN Connection
z You already have performed the procedure under “First Wireless LAN Connection
between the Data Projector and Four Computers” (page 11), and that you have not
changed the Data Projector and/or computer settings since then.
changed the Data Projector and/or computer settings since then.
To establish a wireless LAN connection between four computers and the
Data Projector using the same settings as the last connection
Data Projector using the same settings as the last connection
1
Turn on the Data Projector and connect the CASIO YW-2 wireless adapter to the
Data Projector’s USB port.
Data Projector’s USB port.
z This will start up Wireless automatically and display the “Standing by for connection...”
message on the projection screen.
2
Turn on the first computer and start up Windows.
3
On the first computer, start up Wireless Connection 2.
z When the computer finds the Data Projector, a Connection dialog box will appear.
4
Move the highlighting to the Data Projector to which you want to connect and
then click the [OK] button.
then click the [OK] button.
z This will close the Connection dialog box and display the Wireless Connection 2 window.
5
On the Wireless Connection 2 window, click one of the projection area position
buttons and then click the
buttons and then click the
button.
z This will cause the contents of the computer screen to be projected so they fill the
entire projection area.
6
Repeat steps 2 through 5 for all of the other computers.
7
On the Data Projector’s remote controller, press the [
] key.
z This will display the user list screen, which shows thumbnails of the screen contents of
each connected computer.
8
On the Data Projector’s remote controller, use the [
S], [T], [W] and [X] keys to
select one of the thumbnails and then press the [ENTER] or [
] key.
z This will cause the contents of the selected computer screen to be projected so they fill
the entire projection area.