Cabletron Systems CSMIM-T1 Manual De Usuario

Chapter 3: ROM Monitor Commands

If the unit passes this test, the console displays PASSED. If the 
CSMIM-T1 fails, the console displays an error message. Failing this test 
indicates that the CSMIM-T1 failed to communicate with the 
MicroMMAC. Contact Cabletron Systems Technical Support.

The option_key command loads an option key from the ROM monitor. 
The command syntax is:

option_key [–d ]

The option_key command display looks like this:

The option_key 

command displays the current settings:

The ping command sends an Internet Control Message Protocol (ICMP) 
mandatory ECHO_REQUEST datagram to elicit an ICMP 
ECHO_RESPONSE from a host or gateway. ECHO_REQUEST 
datagrams (pings) have an IP and ICMP header, followed by a structured 
time value and an arbitrary number of pad bytes that fill out the packet. 
The syntax for this command is:

ping host_ip_address [data_size] [npackets]

The host_ip_address entry is the Internet address of the host or gateway 
from which you wish to elicit a response.

The optional data_size entry is the number of bytes sent in a datagram 
packet. The default value is  64 and the maximum value is 1024.

monitor:: option_key

Enter option_key [<uninitialized>]::

monitor:: option_key -d

option_key: <uninitialized>