Cables to Go 39986 Manual De Usuario
11
Problem
Possible Solution
No Operation
1. Verify the 12V power supply is connected to the selector.
2. Make sure all devices are powered on.
2. Make sure all devices are powered on.
No picture or signal;
Poor picture.
Poor picture.
1. Make sure your video display is properly set in PC mode.
2. Check the resolution on your PC. You may need to lower
2. Check the resolution on your PC. You may need to lower
it to a resolution that is compatible with your monitor.
3. Adjust
the
Equalization switch that is located on the
remote unit.
4. Turn all equipment power to off and then restore power.
T
ROUBLESHOOTING