Avid Technology Car Video System PT Manual De Usuario
Media Station|PT Guide
120
2
If needed, re-size the bin window so that you
can see the Start column of the bin window.
3
In the Start column for the sequence for
which you want to set a new start time, type the
new start time using semi-colons (for Drop
Frame) or colons (for Non-Drop Frame), and
press Enter.
new start time using semi-colons (for Drop
Frame) or colons (for Non-Drop Frame), and
press Enter.
4
Click OK to confirm.
Compensating for Different Sequence
Start Times in Pro Tools and a Video
Satellite
Start Times in Pro Tools and a Video
Satellite
You can compensate for any offsets that might
occur if the start times of an Avid sequence dif-
fer between Media Station|PT and Pro Tools.
occur if the start times of an Avid sequence dif-
fer between Media Station|PT and Pro Tools.
To set the Video Satellite Offset:
1
In Pro Tools, choose Setup > Session.
2
In the Video Satellite Offset field, compensate
for the offset between the Pro Tools and video
satellite as follows:
satellite as follows:
• If the start time of the video satellite se-
quence falls before the start time of the
Pro Tools sequence, type a positive time
code value.
Pro Tools sequence, type a positive time
code value.
• If the start time of the video satellite se-
quence falls after the start time of the
Pro Tools sequence, type a negative time
code value.
Pro Tools sequence, type a negative time
code value.
Compensating for Monitor-
Induced Output Delay
Induced Output Delay
Many monitors add a delay to the video output
of one or more frames. You can compensate for
this delay by advancing the video output by the
necessary number of frames.
of one or more frames. You can compensate for
this delay by advancing the video output by the
necessary number of frames.
To set the number of frames to offset video output:
1
Choose Setup > Set Video Sync Offset.
2
In the Satellite field, type the number of
frames by which you want to offset video satel-
lite playback.
lite playback.
3
Click OK.
Linking or Unlinking Pro Tools
and a Video Satellite
and a Video Satellite
After you have connected Pro Tools and a video
satellite to each other, Link buttons appear in
the Pro Tools and Media Station|PT transports.
satellite to each other, Link buttons appear in
the Pro Tools and Media Station|PT transports.
The Link buttons let you use Pro Tools or
Media Station|PT to temporarily “lock” the two
applications to each other. Most playback or
capturing actions performed on one system are
automatically duplicated on the other.
Media Station|PT to temporarily “lock” the two
applications to each other. Most playback or
capturing actions performed on one system are
automatically duplicated on the other.
Bin window (Name and Start columns shown)
Start
column
Standard Pro Tools MachineControl Option
functionality is unaffected and independent
from the video satellite transport operations.
However, chasing MIDI Machine Control or
MIDI time code while linked to a video sat-
ellite is not supported.
functionality is unaffected and independent
from the video satellite transport operations.
However, chasing MIDI Machine Control or
MIDI time code while linked to a video sat-
ellite is not supported.
When using Pro Tools with a video satellite,
audio output from Media Station|PT is only
accurate to +/- approximately 1/2 frame.
Audio should only be monitored if the tim-
ing of the audio does not need to be more
precise.
audio output from Media Station|PT is only
accurate to +/- approximately 1/2 frame.
Audio should only be monitored if the tim-
ing of the audio does not need to be more
precise.