Atmel AVR2070 Manual De Usuario

 

8240B-AVR-06/09 

  #ifndef __AVR_ATmega1281__ 

    #error "Incorrect MCU for Platform! Check Makefile" 

  #endif 

 

  // Set this to the port that the SEL pin is connected to 

  #   define SSPORT     B 

  // Set this to the pin  that the SEL pin is connected to 

  #   define SSPIN      (0x00) 

  // Set this to the port that the SPI port is on 

  #   define SPIPORT    B 

  // Set this to the pin that the MOSI signal is on 

  #   define MOSIPIN    (0x02) 

  // Set this to the pin that the MISO signal is on       

  #   define MISOPIN    (0x03) 

  // Set this to the pin that the SCLK signal is on 

  #   define SCKPIN     (0x01)       

  // Set this to the port that the RST pin is connected to 

  #   define RSTPORT    B 

  // Set this to the pin  that the RST pin is connected to 

  #   define RSTPIN     (0x05) 

  // Set this to the port that the SLP_TP pin is connected to 

  #   define SLPTRPORT  B 

  // Set this to the pin that the SLP_TP pin is connected to 

  #   define SLPTRPIN   (0x04) 

  // Set this to the UART number (0, 1, 2, etc.) for the  

  // serial port being used. 

  #   define USART      1            

 

 

 

 

 

  // Define which port of the AVR hosts the ADC converter. 

  #   define ADPORT     F 

  // Define which pin of the ADC port is connected 

  // to an analog input. 

  #   define ADPIN      (0x00) 

  // Define the DIDR register associated with the ADC pin 

  // (See AVR datasheet). 

  #   define DIDR       DIDR0 

  // Define which 16-bit timer is to be used for the 

  // system timer. 

  #   define TICKTIMER  3 

  // Define which AVR vector handles the radio interrupt. 

  #   define RADIO_VECT INT0_vect 

 

  // Define Macros to handle setting up interrupts and 

  // ADC functionality 

  #define HAL_ENABLE_RADIO_INTERRUPT( ) EICRA |= 3, EIMSK |= 1 

  #define HAL_DISABLE_RADIO_INTERRUPT( ) EICRA&=~3, EIMSK &= ~1