APC AR3814 Manual De Usuario
17
NetShelter 24 U AV Enclosure Installation Manual
Installing Equipment
Warning: To prevent the enclosure from tipping over after equipment installation:
• Make sure you have secured the enclosure before installing equipment.
• Load the heaviest equipment first toward the bottom of the enclosure to prevent the
enclosure from becoming top-heavy.
• Do not extend equipment on sliding rails until you have installed three or more pieces of
similar-sized equipment or until you have installed the stabilizer plate or bolt-down
brackets.
brackets.
• Do not extend more than one piece of equipment on sliding rails at a time.
Before getting started, make sure you have adjusted the vertical mounting rails as needed. To install
rack-mount equipment in the NetShelter AV Enclosure:
rack-mount equipment in the NetShelter AV Enclosure:
1. Review the equipment manufacturer’s installation instructions.
2. Locate the top and bottom U-space on the vertical mounting rails. Every third hole on the
mounting rails is numbered to indicate the middle of a U-space. A U-space consists of one of
these numbered holes and one hole directly above and below it, as shown.
these numbered holes and one hole directly above and below it, as shown.
3. Install the equipment using the #10-32 screws (provided). See the manufacturer’s instructions
provided with the equipment for additional details.
1 U
7
6
5
ns
15
95
a