AC International MTA128ST-USB Manual De Usuario

Note: In Windows 2000 and Windows 98/95, if the Use Country Code and Area Code box is checked in the

string when the user attempts to make a connection. The solution is to not check the Use Country Code and

Area Code box or to simply add the bundling dial modifier to the phone number at the time of connection.

To cancel a call before the TA makes a connection, press any key.

To store a telephone number, type 

&Zn=x in terminal mode, where n is the number of the memory

register in which the number is to be stored, and 

x is the dial command string that you want to store.

For example, type AT&Z9=763-785-3500 <cr> to store the number 763-785-3500 in memory register
9.

To dial a stored telephone number, type 

DSn in terminal mode, where n is the location of the number

you wish to dial. For example, type ATDS3 <cr> dials a telephone stored in memory register 3
location.

To display a stored telephone number, type 

&Zn? in terminal mode, where n is the memory register in

which the number is stored. For example, type AT&Z5? <cr> to display the telephone number in
memory register 5. To list all ten telephone numbers stored in memory, type ATL <cr>.

You can answer incoming calls to the TA either manually or automatically. When the TA detects an
incoming call, it sends a 

RING result code to the computer or terminal after each ring. If autoanswer is

enabled, the TA automatically answers the call. You can manually answer the call with the 

A command.

Both methods are described below.

If your communication program is in terminal mode when the 

RING result code appears on your

monitor, you can manually answer the call by typing 

ATA <cr>.

To cause the TA to automatically answer a call:

1.

Enable autoanswer by setting register 

S0 to the ring on which you want the TA to answer (e.g., in

terminal mode, type 

S0=4 to make the TA answer on the fourth ring). You also can use either of

the configuration utilities to the turn on autoanswer and set the number of rings.

2.

Make sure that the TA is offline.

The TA answers the call after the number of rings specified by 

S0. To disable autoanswer, use a

configuration utility or the command 

S0=0.