Belkin F1DN102U Manual De Usuario

14

Now that you have connected your console and computers to the Switch, 
it is ready for use. You can select which computer you wish to control by 
pressing the corresponding port selector on the front of the Switch. The LED 
will illuminate to indicate which computer (or port) is currently selected. It 
takes approximately 1–2 seconds for the video signal to refresh after switching 
computers. Re-synchronization of the mouse and keyboard signals also occurs. 
This is normal operation and ensures that proper synchronization is established 
between the console and the connected computers.

5

Once you press a port selector, the Switch immediately disables the connection 
between your console and the previously selected computer, and establishes a 
new connection between your console and the new computer selected. Keyboard 
and mouse inputs can only be sent to the selected computer, and video outputs 
can only be received from the selected computer. The Switch also prevents  
any data transfer between connected computers, ensuring the security of  
your computers. 

Please note that the default port at power-up is port one. In case of a power 
failure or if the power is cycled, the Switch will default to port one.

5

Note: It may take longer for your mouse and keyboard to re-synchronize  

when the computer is recovering (or initializing) from Standby, Hibernate, or 

Sleep modes.

Using your Switch