Beko CDA 540 Manual De Usuario

Descargar
Página de 17
FREEZING FRESH FOOD 
 
Please observe the following instructions to obtain the best results. 
Do not freeze too large a quantity at any one time. The quality of the food is best 
preserved when it is frozen right through to the core as quickly as possible. 
Do not exceed the freezing capacity of your appliance in 24 h.  
Placing warm food into the freezer compartment causes the refrigeration machine to 
operate continously until the food is frozen solid. This can temporarily lead to 
excessive cooling of the refrigeration compartment. 
When freezing fresh food, keep the thermostat knob at medium position. Small 
quantities of food up to 1/2 kg. (1 lb) can be frozen without adjusting the temperature 
control knob. 
Take special care not to mix already frozen food and fresh food. 
 
MAKING ICE CUBES 
 
Fill the ice - cube tray 3/4 full with water and place it in the Ice Bank. Loosen frozen 
trays with the handle of a spoon, never use sharp edged objects such as knives, forks. 
Store ice-cubes in the Ice Bank. 
 
Note: If freshly made ice cubes are not consumed for several weeks and stored in Ice 
Bank, they will slowly reduce in size and eventually disappear completely.
 
 
DEFROSTING 
 
A) Fridge compartment 
The fridge compartment defrosts automatically. The  
defrost water runs to the drain tube via a collection  
container at the back of the appliance.  
During defrosting, water droplets may form at the  
back of the fridge compartment where a concealed  
evaporator is located. Some droplets may remain  
on the liner and refreeze when defrosting is  
completed. Do not use pointed or sharp-edged  
objects such as knives or forks to remove the  
droplets  which have refrozen. 
 
If, at any time, the defrost water does not drain 
from the collection channel, check that no food 
particles have blocked the drain tube. The drain 
tube can be cleared with a pipe-cleaner or  
Pushing the special plastic plunger provided 
down the drain tube (2).  
Check that the tube is permanently placed with its 
end  in the collecting tray on the compressor to 
prevent the water spilling. If the frost layer 
reaches about 1/4’’ (7 mm), reduce the setting 
(i.e. from 4 to 1)  to restart automatic defrosting. 
 
 
 
10