Bay Technical Associates 350 Manual De Usuario
Using the Console Interface
893-00992-B
3-13
BootP or Last Address
This mode allows the switch to be managed even if a BootP server is not be
reachable.
reachable.
When selected, this mode operates as follows:
•
When the IP data is entered from the console terminal, the data becomes the
in-band address of the switch and BootP requests are not broadcast. The
switch can be managed using this in-band IP address.
in-band address of the switch and BootP requests are not broadcast. The
switch can be managed using this in-band IP address.
•
When the in-band IP address is not set from the console terminal, the switch
broadcasts BootP requests until it receives a BootP reply containing an
in-band IP address. If the switch does not receive a BootP reply that contains
an in-band IP address within 10 minutes, the switch uses the last in-band IP
address that it received from a BootP server. This IP information is displayed
in the Last BootP column.
broadcasts BootP requests until it receives a BootP reply containing an
in-band IP address. If the switch does not receive a BootP reply that contains
an in-band IP address within 10 minutes, the switch uses the last in-band IP
address that it received from a BootP server. This IP information is displayed
in the Last BootP column.
If an IP address is not currently in use, these actions take effect immediately.
If an IP address is currently in use, these actions take effect only after the switch is
reset or power cycled.
reset or power cycled.
350fbk.book Page 13 Wednesday, July 9, 1997 4:51 PM