Brocade Communications Systems Brocade Mobility Controller RFS6000 Manual De Usuario

Connecting USB devices

4

Connecting USB devices

The Mobility RFS6000 Controller contains one USB port for connecting USB flash 
storage devices to the controller. The controller can use the USB flash storage 
device for file transfers and firmware updates. Follow the setup instructions below 
to connect the devices to the controller and then access those devices through the 
Web UI or Command Line Interface. 

1. Connect the USB flash drive to the USB .

2. Wait a few seconds for the drive to be recognized by the controller.

3. Follow the instructions in the Brocade Mobility RFS Controller System 

Reference  Guide or Brocade Mobility RFS Controller CLI Reference for more 
information on accessing USB storage devices from the controller for file 
transfers or firmware updates..

NOTE

The controller supports USB flash devices formatted with FAT or VFAT (FAT32) 
filesystems only. If your flash storage device is formatted with another filesystem you 
will need to format