Brocade Communications Systems Brocade ICX 6650 53-1002599-01 Manual De Usuario
xii
Brocade ICX 6650 Hardware Installation Guide
53-1002599-01
Brocade ICX 6650 slot and Ethernet port numbering
•
Slot 2 is located on the back of the ICX 6650 device and contains ports 1 through 3 on the top
row and port 4 on the bottom row. These ports are 2x40 GbE QSFP+. Refer to the following
figure.
row and port 4 on the bottom row. These ports are 2x40 GbE QSFP+. Refer to the following
figure.
•
Slot 3 is located on the back of the ICX 6650 device and contains ports 1 through 8. These
ports are 4 x 10 GbE breakout ports and require the use of a breakout cable. Refer to the
previous figure.
ports are 4 x 10 GbE breakout ports and require the use of a breakout cable. Refer to the
previous figure.
How this document is organized
The document contains the following components:
•
provides an overview of the Brocade ICX 6650.
•
provides the information needed to install the
switch in your network.
•
lays out the tasks and commands necessary to
get the switch up and running.
•
discusses the day-to-day operational procedures for
using the switch.
•
describes how to manage temperature settings,
remove MAC addresses, and provides procedures for removing and replacing the
field-replaceable units (FRUs), including the fan assemblies and power supplies.
field-replaceable units (FRUs), including the fan assemblies and power supplies.
•
provides tables of physical, environmental, and
general specifications.
•
provides a list of the regulatory
statements for safety compliance.
•
provides a list of the
international caution and danger statements for safety compliance.
Slot 2
Slot 2 Slot 3