Black & Decker # 900149 Manual De Usuario
Model # 900149: Page 11
TROUBLESHOOTING
Dispenser does not operate.
"
Make sure the power cord is properly connected to a working outlet.
Water is leaking.
"
Bottle may have a leak. Remove bottle and replace with new bottle.
"
If leak remains, remove probe from bottle and call 866-429-7566 for assistance.
No water is coming from the taps.
"
Make sure the bottle is not empty. If so replace it.
"
Make sure to push the water controls in fully.
"
Make sure the probe connection with the water bottle forms a complete seal.
"
Make sure the door is closed.
Cold water is not cold.
"
It takes up to one hour after setup to secure cold water.
"
Make sure the back of the dispenser is at least 4 inches from a wall and there is
free airflow on all 4 sides of the dispenser.
free airflow on all 4 sides of the dispenser.
"
Make sure energy saving switch is ON.
Hot water is not hot.
"
It takes 15-20 minutes after setup to secure hot water.
"
Make sure the power cord is properly connected to a working outlet.
"
Make sure energy saving switch is ON.
Dispenser is noisy.
"
Make sure dispenser is level.
Water tastes bad.
"
Drain water from reservoirs and replace bottle with a fresh one.
"
Sanitize dispenser per Proper Care & Cleaning instructions.
Nightlight Isn’t Working
"
Make sure the power cord is properly connected to a working outlet.
"
Bulb could be out. Call 866-429-7566 for assistance.
Nightlight Is Flashing
"
This indicates bottle is empty. Replace bottle.