Binatone C350 Manual De Usuario

        7 

If the GPS receiver fails to acquire a valid signal when mounted in your car it may be due to a heat 

reflecting coating or heating elements in your windscreen. In these cases use an external antenna. 

 

The antenna has a magnet and can be positioned in various locations in or outside your car to 

obtain the best signal reception. Push the antenna into the socket on the rear of the unit until it 

clicks into place. Then position the antenna so that you receive a valid signal. 

 

 

 

*External Antenna Optional   

 

 

Please visit on www.binatonecarrera.com website for more information.   

 

NOTE: For the very first time using the unit, you have to switch the Hardware Reset Switch to ON 

with the stylus. 

Press the Power Button for 3 seconds to turn the unit ON; you will see the figure below to warn you 
about driving safety. Tap on the 

  button to continue. 

 

When the Hardware Reset Switch is at ON position, press the Power Button for 3 seconds to turn 

the unit on. The following screens will be displayed, and the unit is ready to be used. Tap on an 

icon to enter the function. 

Position the antenna on the roof of your car

 

Plugs into the back of the PND